current location:Home > Products > Optical Fiber
Bending Insensitive Single mode optical fiber G652 G652D

Bending Insensitive Single mode optical fiber G652 G652D

Cable Manufacturer:Yeesun Cable Type:Optical Fiber Time:2024-May-Mon 15:51:32 Browse:() Get factory price

Description

Yeesun Low water peak dispersion unshifted Single-mode fibre optic is designed specially for optical transmission systems operating over the entire wavelength window from 1260 nm to 1625 nm. By suppressing the water peak that occurs near 1383 nm in conventional single mode fibre optic due to hydroxyl (OH) ions absorption, Yeesun fibre is able to open E-band (1360-1460nm) for operation, and consequently provides 100 nm more usable wavelengths.

Specifications

Optical Characteristics

Characteristics Conditions Specified values Units
Attenuation 1310nm ≤0.34 [dB/km]
Attenuation 1383nm(after H2-aging) ≤0.34 [dB/km]
Attenuation 1550nm ≤0.20 [dB/km]
Attenuation 1625nm ≤0.24 [dB/km]
Attenuation vs. Wavelength
Max. α difference
1285-1330nm, in reference to 1310nm ≤0.03 [dB/km]
Attenuation vs. Wavelength
Max. α difference
1525-1575nm, in reference to 1550nm ≤0.02 [dB/km]
Dispersion Coefficient 1285-1340nm -3.5 to 3.5 [ps/(nm·km)]
Dispersion Coefficient 1550nm ≤18 [ps/(nm·km)]
Dispersion Coefficient 1625nm ≤22 [ps/(nm·km)]
Zero Dispersion Wavelength(λ0) 1300-1324 [nm]
Zero Dispersion Slope(S0) ≤0.092 [ps/(nm2·km)]
Typical Value 0.086 [ps/(nm2·km]
PMD / Maximum Individual Fibre ≤0.1 [ps/√km]
PMD / Link Design Value(M=20,Q=0.01%) ≤0.06 [ps/√km]
PMD / Typical Value 0.04 [ps/√km]
Cable Cutoff Wavelength (λCC) ≤1260 [nm]
Mode Field Diameter(MFD) 1310nm 8.7-9.5 [μm]
Mode Field Diameter(MFD) 1550nm 9.8-10.8 [μm]
Effective Group Index of Refraction(Neff ) 1310nm 1.466
Effective Group Index of Refraction(Neff ) 1550nm 1.467
Point Discontinuities 1310nm ≤0.05 [dB]
Point Discontinuities 1550nm ≤0.05 [dB]

Geometrical Characteristics

Characteristics Specified values Units
Cladding Diameter 125.0±0.7 [μm]
Cladding Non-Circularity ≤1.0 [%]
Coating Diameter 235-250 [μm]
Coating-Cladding Concentricity Error ≤12.0 [μm]
Coating Non-Circularity ≤6.0 [%]
Core-Cladding Concentricity Error ≤0.6 [μm]
Curl(radius) ≥4 [m]
Delivery Length Up to 50.4 [km/reel]

Environmental Characteristics ( 1310nm, 1550nm & 1625nm )

Characteristics Conditions Specified values Units
Temperature Dependence Induced Attenuation -60℃ to +85℃ ≤0.05 [dB/km]
Temperature-Humidity Cycling Induced Attenuation -10°C to +85°C, 98% RH ≤0.05 [dB/km]
Watersoak Dependence Induced Attenuation 23°C, for 30 days ≤0.05 [dB/km]
Damp Heat Dependence Induced Attenuation 85°C and 85% RH, for 30 days ≤0.05 [dB/km]
Dry Heat Aging 85℃, for 30 days ≤0.05 [dB/km]

Mechanical Specification

Characteristics Conditions Specified values Units
Proof Test ≥9.0 [N]
Proof Test ≥1.0 [%]
Proof Test ≥100 [kpsi]
Macro-bend Induced Attenuation      
100 Turns Around a Mandrel of 30 mm Radius 1625nm ≤0.05 [dB]
100 Turns Around a Mandrel of 25 mm Radius  Radius
1310nm and 1550nm
≤0.05 [dB]
1 Turn Around a Mandrel of 16 mm Radius 1550nm ≤0.05 [dB]
Coating Strip Force typical average force 1.5 [N]
Coating Strip Force peak force 1.3-8.9 [N]
Dynamic Fatigue Parameter(nd) ≥20

Applications

Thanks to its broad usable optical spectrum and outstanding optical performance, Yeesun fibre is the optimum choice that supports various applications such as Ethernet, Internet Protocol (IP), Asychronous Transfer Mode (ATM), Synchronous Optical Network (SONET) and Wavelength Division Multiplexing (WDM). Yeesun fibre provides more bandwidth for backbone, metropolitan area and access networks.

Characteristics

  • Designed for operation over the full optical spectrum from 1260-1625 nm, which provides 50% more usable wavelengths and hence the transmission capacity is increased
  • Outstanding optical performance supporting high-speed transmission technologies such as DWDM and CWDM
  • Being compatible with existing 1310 nm equipment
  • Good protection and excellent strip force stability
  • Accurate geometrical parameters that insure low splicing loss and high splicing efficiency

Standard

  • Yeesun fibre complies with or exceeds the ITU-T Recommendation G.652.D and the IEC 60793-2-50 typeB1.3 Optical Fibre Specification
  • Yeesun tightens many parameters of fibre products so as to offer more conveniences to customers 

Related recommendations

GET LATEST PRICE

Contact

whatsappWhatsapp

Whatsapp

whatsapp

whatsappEmail

info@yeesuncable.com

Contact